2014 New Holland Construction E55BX

$43,600.00


New/Used
Used
Usage
899 Hours
Availability
In Stock
Location
Henderson Implement Co. - Columbia MO Location
VIN
NETN55136
Stock #
0003341
Title
Clean
Condition
Excellent
Year
2014
Manufacturer
New Holland Construction
Model
E55BX

Overview

Dealer Insights

THIS UNIT IS A ROPS MACHINE.

Description

More Versatility and Power in Tight Areas





The E55Bx compact excavator is built around you for unprecedented on-the-job performance. With superior lifting capacities and a longer swing radius than competitive machines, the short-radius E55Bx is more stable, lifts bigger loads and gets jobs done faster.





• Quality construction and components ensure reliability in tough working conditions. Features include a tough boom and arm, thick, cast-iron swing bracket and a strong cab structure.

• Excellent visibility and a clear view to the sides and rear make operators more confident and efficient.

• The wide cab makes operators more comfortable with outstanding cooling performance, an easy-to-read control panel and plenty of leg room. A newly installed accumulator allows you to easily lower attachments to the ground in the event of an emergency engine shutdown.

• Wide-open service compartments are easy to access for quick daily maintenance checks. The electrical compartment is located under the seat for easy access. Whether you work in construction, demolition or landscaping, the lifting, digging, loading and dozing performance of the versatile E55Bx will save you time and money.

Engine
  • Model: Yanmar 4TNV88 BXPYBD
  • Cylinders: 4
  • Bore/Stroke, in (mm): 3.46 x 3.54 (88 x 90)
  • Displacement, in3 (L): 133.5 (2.2)
  • Fuel injection: Direct
  • Fuel injection pump: Mechanical
  • Fuel: Diesel
  • Fuel filter: Full flow, paper element
  • Cooling: Liquid
  • Horsepower per SAE J1349, Net hp (kW): 39 (29) @ 2400 rpm
  • Maximum torque @ 1440 rpm, Net lbf (N•m): 97 (131)
Boom/Arm
  • Boom Swing, degrees: 70 left / 60 right
  • Boom Length, ft in (m): 9' 6” (2.89)
  • Arm Length, ft in (m): 5' 6.5” (1.66)
Undercarriage
  • Number of rollers Top, each track: 1
  • Number of rollers Bottom, each track: 5
  • Gradeability, percent (degrees): 58 (30)
  • Drawbar Pull, lbf (kN): 12,409 (55.2)
Hydraulics
  • Pumps: Tandem variable displacement axial piston pump
  • Capacity – Maximum, gpm (L/min): 2 x 15 (2 x 57.1)
  • Auxiliary Flow, gpm (L/min): 15 (57.1)
  • System relief pressure – Standard, psi (MPa): 3,336 (23.0)
  • Pilot control hydraulic system:
  • Pump (1): Gear pump
  • Maximum capacity, gpm (L/min): 4 (15.2)
  • Relief pressure, psi (MPa): 514 (3.5)
  • Control valves – 11 spool: Pilot control for left/right track travel, boom, arm, bucket & swing. Manual control for breaker & backfill blade
Swing/Dozer Blade
  • Motor (1): Fixed displacement axial piston design
  • Speed, rpm: 0-8.9
  • Brake: Hydraulic Brake
  • Tail swing radius, ft in (mm): 4' 2” (1280)
  • Tail swing overhang, ft in (mm): 0' 11.7” (299)
Travel
  • Motor (2): Two-speed axial piston design
  • Final drive: Planetary gear reduction
  • Travel speeds – forward/reverse Low, mph (km/h): 1.7 (2.7)
  • Travel speeds – forward/reverse High, mph (km/h): 2.9 (4.6)
Service Capacities
  • Hydraulic tank Refill capacity, gal (L): 9 (34)
  • Hydraulic tank Total system, gal (L): 16 (61)
  • Engine oil w/filter change, gal (L): 2 (7.4)
  • Fuel, gal (L): 19.8 (75)
  • Radiator, gal (L): 1.6 (6.0)
Electrical
  • Voltage: 12 volts, negative ground
  • Alternator, amp: 40
  • Batteries (1) 12V: Low-maintenance
Operating Weight
  • With 551 lb (250 kg) counterweight, 165 lb (75 kg) operator, 247 lb (112 kg) bucket, full fuel and standard equipment, lb (kg): 12,295 (5577)
Hydraulic Cylinders
  • Boom cylinder (1) Bore diameter, in (mm): 3.94 (100)
  • Boom cylinder (1) Rod diameter, in (mm): 2.17 (55)
  • Boom cylinder (1) Stroke, in (mm): 26.8 (680)
  • Arm cylinder (1) Bore diameter, in (mm): 3.54 (90)
  • Arm cylinder (1) Rod diameter, in (mm): 1.97 (50)
  • Arm cylinder (1) Stroke, in (mm): 28.9 (735)
  • Bucket cylinder (1) Bore diameter, in (mm): 2.95 (75)
  • Bucket cylinder (1) Rod diameter, in (mm): 1.57 (40)
  • Bucket cylinder (1) Stroke, in (mm): 21.4 (543)
Dimensions
  • Overall height, ft in (m): 8'4” (2.55)
  • Overall length, ft in (m): 17' 10” (5.42)
  • Width of upperstructure, ft in (m): 6' 4” (1.94)
  • Track overall length, ft in (m): 8' 1” (2.48)
  • Track overall width w/15.7 in (400 mm) shoes, ft in (m): 6' 5” (1.96)
  • Track shoe width, in (mm): 15.7” (400)
  • Center to center (idler to sprocket), ft in (m): 6' 6” (1.90)
  • Upperstructure ground clearance, in (mm): 24.5” (625)
  • Minimum ground clearance, ft in (mm): 1' 2” (350)
  • Tail swing radius, ft in (mm): 4' 2” (1280)
  • Backfill blade height, ft in (mm): 1' 2” (345)
  • Working weight, lb (kg): 12,181 (5525)
  • Ground pressure, psi (kPa): 4.5 (31.3)
  • Boom swing, degrees: Left 70 / Right 60
  • Tail swing overhang, ft in (mm): 0' 11.7” (299)
Performance Specs
  • Arm ft in (m) : 5' 6.5” (1.66)
  • Maximum dig radius, ft in (m): 20' 5” (6.22)
  • Dig radius at groundline, ft in (m): 19' 11” (6.07)
  • Maximum dig depth, ft in (m): 12' 10” (3.91)
  • Dump height, ft in (m): 13' 10” (4.20)
  • Overall reach height, ft in (m): 18' 11” (5.76)
  • Bucket rotation, degrees: 178
  • Vertical straight wall dig depth, ft in (m): 10' 0.5” (3.06)
  • Arm breakout force, ISO lbf (kN): 5,598 (24.9)
  • Bucket breakout force, 2 position bucket, ISO lbf (kN): 11,240 (50)

Specs

Engine

Engine Type
4TNV88 BXPYBD
Engine Manufacturer
Yanmar
Horsepower
39 hp (29 kW)
Rated RPM
2,400 rpm
Fuel Capacity
19.8 gal. (75 L)

General

Length
17 ft. 10 in. (5420 mm)
Width
6 ft. 4 in. (1940 mm)
Height
8 ft. 4 in. (2550 mm)
Weight
12,181 lb. (5525 kg)
Hydraulic System
Total flow: 2 x 15 gpm (2 x 57.1 Lpm)
Max Dig Depth
12 ft. 10 in. (3910 mm)
Max Dump Height
13 ft. 10 in. (4200 mm)
Max Reach
18 ft. 11 in. (5760 mm)
Speed
1.7 - 2.9 mph (2.7 - 4.6 km/h)